
Signs your wood garage door needs refinishing
- The color has faded, especially on the lower panels and the sunny side
- The wood has turned gray or silver
- The finish is peeling, flaking or blotchy
- Water no longer beads on the surface after rain or sprinklers
- Dark water stains or rough, raised grain along the bottom
Why wood garage doors fade in Austin
Wood finishes break down under ultraviolet light, heat and moisture. A garage door is usually the largest wood surface on the front of a house, often faces the street and the afternoon sun, and gets splashed by sprinklers and rain along the bottom. Once the finish fails, the wood itself starts to gray and dry out.
Refinishing before the wood is damaged is far less work than replacing panels later, and it keeps the look of real wood that is hard to match.
What refinishing involves
- Inspecting the door for loose joints, rot and hardware problems before any finish goes on
- Cleaning off dirt, mildew and loose finish
- Removing the failed finish and sanding the surface so the new stain soaks in evenly
- Applying stain in the color you choose, matched to the original or changed to a new tone
- Sealing with a protective clear finish made for exterior wood in strong sun
We look at the door before quoting, so you know exactly what it needs and what it will cost before any work begins.
Refinish, repair or replace?
If the wood is sound and only the finish has failed, refinishing is the best value. If panels are rotten, split or delaminating, those sections may need repair or replacement first. If the door is beyond saving, see garage door replacement, or compare carriage house doors in wood look steel, which need far less upkeep.
What it costs
Wood garage door staining and refinishing starts at $1,500. Where your job falls depends on the size of the door, how many doors there are, the condition of the wood and the finish you choose. You get the exact price in writing before work begins, and financing options are available.
What to expect from a Tier One visit
Call or send a request
Tell us what the door is doing. We’ll give you the earliest time we can be there.
We diagnose the problem
The technician inspects the whole door system, not only the part that failed.
You approve the price
You get a clear explanation and the price before any work begins.
We repair and test
The door is repaired, balanced and safety tested before we leave.
Wood Garage Door Staining & Refinishing FAQs
How much does it cost to refinish a wood garage door in Austin?
Wood garage door staining and refinishing with Tier One starts at $1,500. The exact price depends on the door size, the number of doors, the condition of the wood and the finish, and you get it in writing before work begins.
How often should a wood garage door be refinished in Texas?
It depends on how much sun and water the door gets. Doors facing the afternoon sun need it most often. When the color fades or water stops beading on the surface, it is time.
Can you change the color of my wood garage door?
Usually, yes. Once the old finish is removed, the door can be stained in a new tone. Very dark old stains can limit how light the new color can go.
Can a gray, weathered wood garage door be restored?
In many cases, yes. If the wood underneath is sound, removing the weathered surface and refinishing brings the grain back. Rotten or split sections need repair first.

